Hover to zoom File for Sewing Machine Needle Plate
Part number USV-N1216
$26.00
- Next business daydispatch
- Free shippingon US orders $50+
- 30-dayreturns
Needle Plate. General fit — check the specification against your machine. Fitment is taken from the distributor's listing; models not named are not claimed.
A needle plate — File for Sewing Machine Needle Plate. This is a general-fit part; the fit notes below explain how to confirm it suits your machine. It is a compatible (aftermarket) part, not a manufacturer-original part.
What this part does
The needle plate (also called the throat plate or stitch plate) is the metal plate the fabric rests on. It has the needle hole, slots for the feed dogs and often etched seam guides. Needle strikes leave burrs around the hole that snag thread and fabric, which is the usual reason to replace it.
Specifications
| Brand | Parts Accessories |
|---|---|
| Part type | Needle Plate |
| Details | File for Sewing Machine Needle Plate |
| Part status | Compatible / aftermarket |
| Distributor item no. | N1216 |
| UPC | 744674612168 |
How to tell if this is the right one
A needle plate must match the feed-dog spacing and the needle hole position of the machine. Use the model list; a plate from a similar-looking machine may not line up with the feed dogs. If a listing says 'straight stitch', the hole is a small round one for straight sewing only — do not use a zigzag stitch with it fitted.
Signs you need this part
Burrs or a rough edge around the needle hole, fabric being pushed down into the hole, skipped stitches on fine fabric, or a plate that is bent or cracked from a needle strike.
Fitting it
Remove the retaining screws (usually two) or press the release lever, lift the old plate, clean the feed dog area and fit the new plate. Turn the handwheel by hand to confirm the needle clears the hole before sewing.
Questions about this part
Which machines does this needle plate fit?
The distributor's listing does not name specific models for this part, so we do not claim a fitment. Compare the specification on this page with the part you are replacing, or send us your machine's model number and we will check.
Can I polish the burr out instead?
Light burrs can be dressed with fine emery, but a plate that has been struck hard is usually bent. A replacement is inexpensive compared with the time spent fighting skipped stitches.
How long does delivery take?
Orders are dispatched from our distributor's US warehouse. We do not hold stock ourselves and cannot promise same-day dispatch; current delivery estimates are shown at checkout, and we will email you if an item is back-ordered.
You may also need
Parts and supplies that go with this item. Orders of $50 or more ship free in the US.
-
Wonderfil Iron n Fuse Thread-40wt 183m 5ct$44.10 per box of 5 -
Mettler Silk Finish Cotton 28wt Thread 245 m (5-pack)$40.00 per box of 5 -
Dritz Seam Ripper & Threader (Box of 6)$42.30 per box of 6 -
More in Needle plates
-
Brand part -
Compatible -
Compatible -
Brand part -
Brand part -
Brand part -
Brand part Needle Plate A for Baby Lock BLMCC, BLMAV, BLMPR and BLMSP Fits Baby Lock BLMAV, BLMCC, BLMPR +1$46.40 -
Brand part -
Brand part -
Brand part -
Brand part -
Brand part
