Get ready to learn lots of cool things with your 4-Thread overlock serger. This crossbody bag is embellished with 2-Thread Flatlock wide decorative stitching, features cork material, piping on the front and around the outside, top 4.5mm-5mm nylon coil zipper, narrow hem adjustable straps, clever back pocket detail, and tricks on how to achieve all this. There is a small amount of stitching with a sewing machine, but 99% is created with a serger. Hardware is 1/2in wide rings, swivel hooks, and a 1/2in purse slider. You will need the Piping/Cording foot and a decorative serger thread such as Pearl Crown Rayon. Final Dimensions are 9 1/2in x 10 1/2in.

Use your serger and sewing machine together to create one useful caddy to hold your serger presser feet and attachments, plus discover how to use additional serger presser feet and attachments. Ideal for hanging next to your serger, taking to classes, or folding up and storing in your drawer. Use your serger with the piping cording foot to install the 4.5mm - 5mm nylon coil zipper to form the top pocket. Store instructional guides or larger accessories inside the zipper pocket. The second pocket is made from mesh material, gathered at the bottom using the gathering or ruffling foot with elastic added on top, with the Elastic or Elasticator foot, holding the pocket snug to hold larger serger attachments. The bottom pocket is a simple flat pocket made of a wide piece of elastic stitched closed together to hold your serger presser feet, sewn with a sewing machine. The entire caddy is finished off with binding around the outside. There is a piece of elastic to close and wrap around the outside, which doubles as a hanger loop so you can hang on the way, next to your serger. Finished measurements are- Open 12in x 14in and Closed 12 inch x 6 1/2in. Serger Presser Feet Required- Elastic or Elasticator, Piping or Cording, and Gathering or Ruffling foot.